- HOME /
- Modules /
- RO Membrane
Fouling Resistance Series
Request a QuoteDescription
MS Fouling Resistance (FR) series are aromatic polyamide composite membrane elements for the desalination of brackish water in low and medium concentrations (with salt concentrations below ,mg/L), featuring high desaliation rates and large flux, which can be widely used in municipal water sippl, surface water reuse, coal chemical industry, coal-firred power boiler make-up water, food industry, textile printing and dyeing, electroplating, and other fields. The FR series features wider flow channel and higher fouling resistance compared to conventional brackish water membrane elements.
Features
-
New charge decontamination technology
-
Highly hydrophilic and anti-pollution effect
-
Long time operated in harsh environments
-
High permeate flow and salt rejection under low pressure
-
Decreasing the cost for relevant facilities and operating cost for yhe RO system
Typical Applications
-
Pure water production
-
Boiler feed water
-
Foodstuff processing
-
Pharmaceutcal production
Technical Parameters
Performance Parameter |
Salt rejection(%) | 99.5 |
Feed spacer (mil) | 34 | |
Test Condition |
Test water Pressure(psi) | 225 |
Test Solution | NaCI Solutions | |
Test water temperature(℃) | 25 | |
Recovery rate per element(%) | 15 | |
Operating Limits |
Max.operating pressure(psi) | 600 |
Max.operating Temperature(℃) | 45 | |
Max.pressure drop for each element(psi) | 15 | |
Chemical feed water PH (30min) | 1-13 | |
Continuous feed water PH | 2-11 | |
Maximum Feed water SDI | 5 | |
Feed water chlorine concentration(ppm) | ≤0.1 | |
Max.Feed water flow(gpm) | 16 for 2.5/4.0 inches 75 for 8.0 inches |
Ordering Information
FRRO-MS |
Model No. |
Dimensions(mm/inch) |
Effective surface |
Product flow rate |
|||
A (Length) |
B(Diameter) |
C |
D |
||||
2521 |
533±1/21 |
61±1/2.5 |
19.1/0.75 |
30/1.18 |
11/1.0 |
300/1.1 |
|
2540 |
1016±1/40 |
61±1/2.5 |
19.1/0.75 |
30/1.18 |
25/2.3 |
750/2.8 |
|
4021 |
533±1/21 |
99.7±1/4.0 |
19.1/0.75 |
26.7/1.05 |
39/3.6 |
950/3.6 |
|
4040 |
1016±1/40 |
99.7±1/4.0 |
19.1/0.75 |
26.7/1.05 |
90/8.4 |
2200/8.3 |
|
8040-365 |
1016±1/40 |
201.9±1/8.0 |
28.6/1.125 |
/ |
365/33.9 |
9600/36.3 |
|
8040-400 |
1016±1/40 |
201.9±1/8.0 |
28.6/1.125 |
/ |
400/37.2 |
10500/39.7 |